RTL300MAX-T High-Power Red Light Therapy Panel for Professionals

High Power Red Light Therapy Panel: Key Highlights

• Five standard wavelengths: 630nm, 660nm, 810nm, 830nm and 850nm.
• 450 listed LED chips arranged as 150 single-red LED packages and 150 dual-chip near-infrared packages.
• 2.4-inch touchscreen with nine functional presets and three customizable modes.
• Independent red and near-infrared brightness adjustment from 1% to 100%.
• Adjustable pulse or flicker function; the exact unit and firmware limits require confirmation.
• 100-240V AC input and manufacturer-listed maximum rated power of 1200W +/- 10% at 110V.
• Roller base, wall-mount and horizontal installation options.
• Three-year manufacturer-stated warranty.
• OEM/ODM options for spectrum, logo, interface, housing color, accessories and packaging.

The RTL300MAX-T belongs to IDEATHERAPY’s five-wavelength touchscreen panel series. Buyers planning a wider installation can compare the RTL450MAX-T commercial panel and the larger RTL600MAX-T professional panel before selecting a platform.

RTL300MAX-T Technical Specifications

Specification note: one product artwork heading uses “RLPRO300MAX-T,” while the page title and specification field identify the model as RTL300MAX-T. The normalized model name is used throughout this copy. The same artwork lists a 1-10,000 “flicker” range without a clearly stated unit, so buyers should request the current firmware specification before publishing a frequency claim.

Five Wavelengths with Separate Red and NIR Control

The standard spectrum combines visible red channels at 630nm and 660nm with near-infrared channels at 810nm, 830nm and 850nm. This gives an operator more configuration options than a two-channel panel, but the wavelength list alone does not define optical performance. LED allocation, drive current, lens design, distance and panel geometry all affect the delivered field.

The interface artwork shows red and NIR brightness controlled separately. For repeatable operation, record the active channels, percentage settings, distance, session duration and any pulse setting as one protocol. If an OEM version changes the wavelength mix, request a revised LED map and sample test report for the exact configuration.

Touchscreen Presets and Manual Control

The 2.4-inch touchscreen provides nine functional presets and three customizable modes. Presets can shorten staff training and reduce setup time, while the custom modes allow a business to store its own operating combinations. The basic remote supports common adjustments without requiring direct access to the screen.

Before approving a sample, verify what each preset changes, whether settings remain after power loss, how custom modes are saved and whether the remote can alter every value shown on the screen. Interface labels and instructions should match the production firmware and the language requirements of the destination market.

Professional Applications

• Clinics and professional practices: create a documented equipment workflow with defined positions and settings.
• Fitness and team environments: add a configurable light-based wellness station to an existing recovery area.
• Studios and wellness rooms: use the mid-size format where a large full-body panel would occupy too much space.
• Commercial facilities: combine preset operation with flexible mounting for repeatable staff use.
• Distributors and private-label brands: offer a touchscreen model with configurable presentation and packaging.

Facility planners can review IDEATHERAPY’s pages for athletic and team training centers and commercial and leisure facilities. The correct installation should be selected around room dimensions, electrical supply, user flow, cleaning access and operator training.

Flexible Installation and Service Access

The product presentation shows three installation approaches: a mobile roller base, wall mounting and horizontal positioning. A roller base supports movement between stations, a wall mount conserves floor space, and a horizontal setup can change how the panel is positioned over the user. Confirm which bracket or stand is included and which accessories are ordered separately.

Installation planning should preserve ventilation around the rear fans and side openings. Staff also need safe access to the power inlet, switch, touchscreen and attachment points. For a wall or overhead configuration, request load ratings, fastener requirements and installation instructions appropriate to the supporting structure.

LED Architecture, Power and Included Components

The artwork describes 450 chips as 150 single-red LED packages plus 150 dual-chip NIR packages. This distinction matters: the chip count is not the same as the number of visible lens positions. Buyers should request both the package map and chip-level wavelength allocation when comparing this product with another panel.

The listed 1200W figure is maximum rated power at 110V, not automatically the wall consumption of every mode. Actual demand can vary with active channels and brightness. The package artwork shows the panel, protective glasses, remote, user manual, hanging hardware, suspension cables and power cable; confirm the final bill of materials, plug type and optional stand before purchase.

B2B Procurement Checklist

• Confirm the five wavelengths, chip allocation and production LED map.
• Request irradiance and uniformity data with complete test conditions.
• Verify touchscreen firmware, preset definitions and custom-mode behavior.
• Confirm pulse terminology, units, adjustment increments and limits.
• Measure operating power, thermal behavior and fan noise under realistic use.
• Select and load-test the intended stand, wall bracket or horizontal mount.
• Review plug type, cable specification, grounding and destination-market electrical requirements.
• Approve labels, manuals, packaging, accessories and warranty terms.
• Define sample approval, batch inspection, change control and traceability.

Wholesale buyers should compare documentation quality and production controls alongside unit price. IDEATHERAPY’s guide for B2B red light panel buyers provides a broader framework for supplier qualification, sampling and order review.

OEM/ODM Development

An OEM high power red light therapy panel can be configured around wavelength allocation, housing color, logo, touchscreen graphics, saved modes, accessories, manuals and carton artwork. Optical or software changes should be treated as engineering changes rather than cosmetic edits because they may affect test results, labeling and user instructions.

For each private-label version, maintain one controlled specification covering hardware, firmware, packaging and documents. Certification claims should be checked against the exact model, applicant, report number and destination market instead of relying on a family-level marketing graphic.

FAQ

Which wavelengths are standard on the RTL300MAX-T?

The standard configuration lists 630nm, 660nm, 810nm, 830nm and 850nm. A customized spectrum should be documented with its own LED allocation map and test report.

How are the 450 LED chips arranged?

The product artwork describes 150 single-red LED packages and 150 dual-chip NIR packages, for 450 chips in total. The chip count and the visible LED package count are therefore different.

What controls and modes are included?

The panel uses a 2.4-inch touchscreen and an included basic remote. The interface lists nine functional presets plus three customizable modes, with separate red and NIR brightness adjustment.

What irradiance does the manufacturer artwork list?

The artwork lists 202.5 mW/cm2 at 3 inches, 158.7 mW/cm2 at 6 inches and 164.9 mW/cm2 at 9 inches. Because the values are not monotonic and the test conditions are not fully stated, buyers should request the raw test method and verify an approved sample.

Which installation methods are available?

The product presentation shows a mobile roller base, wall mounting and horizontal positioning. Confirm bracket compatibility, load rating and included hardware for the selected configuration.

Can the RTL300MAX-T be customized?

Yes. OEM/ODM discussions can cover wavelengths, housing color, logo, touchscreen UI, saved modes, accessories, manuals and packaging, subject to technical review and order requirements.