TLF300 可穿戴式腳部與小腿紅光治療靴

Foot and calf red light therapy boots give wellness operators and product brands a close-contact format for delivering red and near-infrared light around the feet, ankles and lower legs. The TLF300 combines a full-length wearable boot, a detachable foot section and a removable leg wrap, allowing one system to support several targeted positioning options.

The standard TLF300 configuration uses 1,155 LED chips in 385 triple-chip groups, combining 660nm red light with 850nm near-infrared light. A full-color touch controller manages timing, brightness, pulse and preset scenes. Buyers can compare this format with IDEATHERAPY’s wider wearable red light therapy range or review the complete red light therapy product collection when planning a coordinated portfolio.

TLF300 Foot and Calf Red Light Therapy Boots: Key Features

• Close-contact wearable design covering the foot, ankle and calf.
• Modular construction: the complete boot separates into a foot boot and a flexible leg wrap.
• 1,155 LED chips arranged as 385 groups of three chips.
• 660nm red light and 850nm near-infrared light in an 850nm + 660nm + 850nm chip layout.
• Manufacturer-stated irradiance of 170.5mW/cm² under the supplier’s test conditions.
• Full-color touch controller with time, brightness, pulse, 12 scene modes and memory functions.
• OEM/ODM options for material, color, logo, wavelength mix, user manual and packaging.
• One-year standard warranty with manufacturer after-sales support.

技術規格

Measurement note: irradiance is not directly comparable unless suppliers disclose the test distance, meter model, calibration method and measurement positions. Procurement teams should request the current test report for the exact production configuration.

A Modular Boot and Leg Wrap System

TLF300 is designed as more than a single fixed boot. The lower foot section and upper leg wrap can be separated, so operators can position the light around the foot and ankle, around the calf, or as a flexible wrap on another suitable body area. This modular structure can reduce the number of separate wearable formats needed in a treatment room or retail product line.

For B2B evaluation, buyers should examine fastening strength, internal LED coverage, cable routing, bend radius, surface comfort and cleaning instructions. A wearable device must maintain consistent contact without creating excessive pressure or heat during a normal session.

Why the TLF300 Uses 660nm and 850nm

The standard triple-chip arrangement places one 660nm red-light channel between two 850nm near-infrared channels. Visible 660nm light is commonly selected for surface-focused wellness applications, while invisible 850nm light is used when a product brief calls for light delivery beyond the surface. Buyers can use the 660nm 與 850nm 波長比較 to understand the roles of each wavelength and the limits of comparing devices by wavelength alone.

Touch-Screen Control for Repeatable Sessions

The full-color controller gives users direct access to time, brightness and pulse settings. Twelve scene modes support different operating preferences, while the memory function can reduce repeated setup for frequently used configurations. In commercial environments, a clear controller can help staff standardize session preparation and explain the available settings to clients.

Commercial Applications

• Wellness spas: add a targeted lower-leg and foot option to a broader light-therapy menu.
• Physiotherapy and recovery facilities: incorporate a wearable format into professionally supervised wellness routines.
• Sports recovery rooms: provide close-contact coverage for customers focused on the feet, ankles and calves after training.
• Foot-care studios: offer a programmable light-based wellness service alongside established care procedures.
• Home wellness brands: supply a wearable alternative for customers who do not want a standing panel or large mat.

Brands developing recovery-focused content can connect the product page with educational material such as the guide to light therapy for tendon and ligament recovery. Educational content should explain realistic use cases without presenting a consumer wellness device as a diagnosis or cure.

What Professional Buyers Should Verify

• Confirm whether the quoted package contains one wearable boot system or a left-and-right pair.
• Request an LED layout drawing and irradiance map for the foot and calf sections.
• Check the destination-market voltage, plug, adapter markings and required compliance documents.
• Evaluate fit range, fastening durability, cable strain relief and controller connector life.
• Review cleaning instructions, material specifications and temperature testing.
• Test every controller mode on an approved sample before confirming production.
• Agree on spare-part availability, packaging protection, warranty handling and response times.

These checks make foot and calf red light therapy boots easier to compare across suppliers. They also prevent a strong product image from substituting for the documentation, repeatability and after-sales terms required in a professional purchasing decision.

OEM/ODM and Private Label Development

IDEATHERAPY supports private label wearable red light therapy programs for wellness brands, distributors and professional equipment suppliers. Custom discussions can include material and color, logo position, wavelength mix, controller interface, user manual and retail packaging. Projects that require a more differentiated specification can use the company’s customized OEM/ODM development service to align TLF300 with a broader wearable product strategy.

常見問題

What areas do the TLF300 foot and calf red light therapy boots cover?

The complete wearable format covers the foot, ankle and calf. Its detachable design also allows the foot boot and leg wrap to be positioned separately where their size and fastening system provide an appropriate fit.

Which wavelengths are used in the TLF300?

The standard LED configuration combines 660nm red light and 850nm near-infrared light in an 850nm + 660nm + 850nm triple-chip arrangement.

How many LED chips are inside the wearable system?

The product artwork specifies 1,155 chips, arranged as 385 groups with three chips per group. Buyers should request the LED layout drawing for the exact ordered version.

What can users adjust on the controller?

The touch controller provides time, brightness and pulse settings, together with 12 scene modes and a memory function. Functions should be verified on the approved sample because customized controller versions may differ.

Is TLF300 available for private label projects?

Yes. OEM/ODM discussions may cover material, color, logo, wavelength mix, controller interface, manual and packaging. Minimum order quantity and validation requirements depend on the requested changes.

What is included with the TLF300?

The current product presentation shows the wearable boot system, power adapter, smart touch controller and user manual. Buyers should confirm unit quantity, plug type and final packing list in the purchase specification.